We come to site, mount the receiver, run the cables, get the power sorted, and configure corrections to your fleet before we leave. After that we're on call for the life of the job.
Receiver, solar, radio, cabling, mounting hardware — installed by us on your site, configured to your fleet, with support for the life of the hire.
GNSS receiver, GNSS antenna, RTK radio, and radio antenna — everything needed to broadcast centimetre-accurate corrections via UHF or NTRIP. Compatible with Trimble, Leica, Topcon, and Hemisphere.
RTK BaseStandalone solar for remote and off-grid sites, or mains-connected where power is available. Both keep the base running continuously for the life of your project.
Always OnMounted to site office, pole or other structure on site. Built for semi-permanent installation on site. No need to pack up at the end of each day.
Site-ReadyWe come to your site, mount the receiver, run all cabling, connect power, and set up corrections. Base coordinates handed over in NZTM2000 — your machine control tech plugs straight in.
Installed by UsMixed fleets, radio grief, config changes as the project moves — ring us and we'll sort it. Phone support included. Site visits charged separately unless the fault is with our gear.
IncludedNZ has only three licensed DGNSS radio channels. On congested sites we configure NTRIP instead — no interference, no range limits. Sorted at installation, no extra cost.
No Extra CostExcavators, graders, dozers, and compactors running 3D guidance all day from a single base. Cut and fill to design without a surveyor on the tools.
Trimble / Leica / TopconSurveyors show up, connect to the base, and they're working in minutes. No setting up a tripod each morning, no packing it down at night. The base is there for the life of the job.
NZTM2000 ReadyEvery as-built check, layer confirmation, and volume calc references the same fixed datum. When the engineer audits your QA data, it all ties back to one known point — no discrepancies between days or crews.
Audit-Ready DataPPK corrections from a known point on site give you survey-grade orthos and point clouds — not just flyover imagery. One base feeds your GCPs and your post-processing in a single workflow.
GCP / PPK
Same business day response · Hire from 1 week to months
Hire for the project, hand it back. No depreciation, no ownership headaches, no gear sitting in the yard between jobs.
Solar or mains — base stays running regardless of site conditions or grid access.
Configured to your machine control systems from day one. Trimble, Leica, Topcon, Hemisphere — we've worked with the lot.
From a single week through to months on site. Longer jobs get better rates — ring us and we'll work out something sensible.
Tell us about the project — where it is, how long it's running, and what machinery you've got on site. We'll come back same business day.